Low Dth Hammers
Model No.︰-
Brand Name︰-
Country of Origin︰China
Unit Price︰CNY ¥ 30 / set
Minimum Order︰1 set
Product Description
ANBIT Series DTH Hammer, a kind of valve-equipped Low-Air-Pressure hammer with a single piston, a plate valve and a central exhaust structure.The compressed air is adopted as the driving force. To prevent dust pollution and get a better performance, some high-pressure water may be added into the air for wet rock DTH drilling.
Product Description
Product featured :
The strong energy of single impact and the low energy consumption in rock crushing;
2. The weight ratio of Piston and Bit almost Reaches 1:1 to provide long effective acting time, which leads to the improved efficiency in rock crushing and the extended service life of the drilling tool;
3. A good performance in central air exhaust and cuttings discharge, which reduces the repeated crushing of rock;
4. A check valve device is available to drill holes finder water.
The ANBIT Series DTH Hammer, an ideal drilling tool, is widely used in such industries relating to energy, transportation,metallurgy,building etc.
Specification
|
|
|||
|
Length |
870(mm) |
|
|
|
Connection Thread |
F48x10 PIN |
|
|
|
External Diameter |
82(mm) |
|
|
|
Weight |
24(KG) |
|
|
|
Hole Range |
90-120(mm) |
|
|
|
Working Pressure |
10-13(Bar) |
|
|
|
Air Consumption |
8-10 (m³ / min) |
|
|
|
dirll Tail rod |
CIR90 / M3 |
|
|
|
1、Connection |
ANBIT3-01 |
9、Reed spring |
ANBIT3-09 |
|
2、O type ring |
ANBIT3-02 |
10、Guide sleeve |
ANBIT3-10 |
|
3、top |
ANBIT3-03 |
11、"O"ring |
ANBIT3-11 |
|
4、check valve |
ANBIT3-04 |
12、front top sub |
ANBIT3-12 |
|
5、spring |
ANBIT3-05 |
13、stop ring |
ANBIT3-13 |
|
6、valve seat |
ANBIT3-06 |
12、front top sub |
ANBIT3-14 |
|
7、Cylinder |
ANBIT3-07 |
15、outer tube |
ANBIT3-15 |
|
8、piston |
ANBIT3-08 |
|
|
ABT Drilling Equipment Co., Ltd. mainly provides drilling rig equipment to help you solve the problem of drilling at high efficiency and low cost. Always feel free to inquiry!